Access Control Lists (ACLs) Configuration with commands in Red Hat Enterprise Linux 5

Files and directories have permission sets for the owner of the file, the group associated with the file, and all other users for the system. However, these permission sets have limitations. For example, different permissions cannot be configured for different users. Thus, Access Control Lists (ACLs) were
implemented.
The Red Hat Enterprise Linux 5 kernel provides ACL support for the ext3 file system and NFS-exported file systems. ACLs are also recognized on ext3 file systems accessed via Samba. Along with support in
the kernel, the acl package is required to implement ACLs. It contains the utilities used to add, modify, remove, and retrieve ACL information. The cp and mv commands copy or move any ACLs associated
 with files and directories.

Mounting File Systems

Before using ACLs for a file or directory, the partition for the file or directory must be mounted with ACL support. If it is a local ext3 file system, it can mounted with the following command:
mount -t ext3 -o acl <device-name><partition>
For example:
mount -t ext3 -o acl /dev/VolGroup00/LogVol02/work
Alternatively, if the partition is listed in the /etc/fstab file, the entry for the partition can include the acl option:
LABEL=/work /work ext3 acl 1 2
If an ext3 file system is accessed via Samba and ACLs have been enabled for it, the ACLs are recognized because Samba has been compiled with the -- with-acl-support option. No special flags are required when accessing or mounting a Samba share.

NFS

By default, if the file system being exported by an NFS server supports ACLs and the NFS client can read ACLs, ACLs are utilized by the client system. To disable ACLs on NFS shares when configuring the server, include the no_acl option in the /etc/exports file. To disable ACLs on an NFS share when mounting
it on a client, mount it with the no_acl option via the command line or the /etc/fstab file.

Setting Access ACLs

There are two types of ACLs: access ACLs and default ACLs. An access ACL is the access control list for a specific file or directory. A default ACL can only be associated with a directory; if a file within the directory does not have an access ACL, it uses the rules of the default ACL for the directory. Default ACLs are optional. ACLs can be configured:
Per user
Per group
Via the effective rights mask
For users not in the user group for the file
The setfacl utility sets ACLs for files and directories. Use the -m option to add or modify the ACL of a file or directory:
setfacl -m <rules><files>
Rules (<rules>) must be specified in the following formats. Multiple rules can be specified in the same command if they are separated by commas.
u:<uid>:<perms>
Sets the access ACL for a user. The user name or UID may be specified. The user may be any valid user on the system.
g:<gid>:<perms>
Sets the access ACL for a group. The group name or GID may be specified. The group may be any valid group on the system.

m:<perms>
Sets the effective rights mask. The mask is the union of all permissions of the owning group and all of the user and group entries.
o:<perms>
Sets the access ACL for users other than the ones in the group for the file. White space is ignored. Permissions (<perms>) must be a combination of the characters r, w, and x for read, write, and execute. If a file or directory already has an ACL, and the setfacl command is used, the additional rules are added
to the existing ACL or the existing rule is modified. For example, to give read and write permissions to user andrius:
setfacl -m u:andrius:rw /project/somefile
To remove all the permissions for a user, group, or others, use the -x option and do not specify any permission (s):
setfacl -x <rules><files>
For example, to remove all permissions from the user with UID 500:
setfacl -x u:500 /project/somefile

Setting Default ACLs

To set a default ACL, add d: before the rule and specify a directory instead of a file name. For example, to set the default ACL for the /share/ directory to read and execute for users not in the user group (an access ACL for an individual file can override it):
setfacl -m d:o:rx /share

Retrieving ACLs

To determine the existing ACLs for a file or directory, use the getfacl command. In the example below, the getfacl is used to determine the existing ACLs for a file.
getfacl home/pupo/picture.png

The above command returns the following output:
# file: home/pupo/picture.png # owner: john # group:
john user::rwgroup::
r-- other::r--
If a directory with a default ACL is specified, the default ACL is also displayed as illustrated below.
[pupo@main /]$ getfacl home/sales/# file: home/sales/
# owner: john # group:
pupo user::rw- user:barryg:r-- group::r-- mask::r--
other::r-- default:user::rwx default:user:john:rwx
default:group::r-x default:mask::rwx default:other::rx

Archiving File Systems With ACLs

The star utility is similar to the tar utility in that it can be used to generate archives of files. The star package is required to use this utility. The command
line options for Star are as follows
Option                               Description
-c                               Creates an archive file.
-n                               Do not extract the files; use in conjunction with -x to show what
                                   extracting the files does.
-r                                 Replaces files in the archive. The files are written to the end of the archive
                                   file, replacing any files with the same path and file name.
-t                                Displays the contents of the archive file.
-u                              Updates the archive file. The files are written to the end of the archive if they
                                  do not exist in the archive or if the files are newer than the files of the same name
                                 in the archive. This option only work if the archive is a file or an unblocked tape
                                  that may backspace.

-x                              Extracts the files from the archive. If used with -U and a file in the archive is
                                 older than the corresponding file on the file system, the file is not extracted.
-help                          Displays the most important options.
-xhelp                        Displays the least important options.
-/                               Do not strip leading slashes from file names when extracting the files from an
                                 archive. By default, they are striped when files are extracted.
-acl                           When creating or extracting, archive or restore any ACLs associated with the
                                 files and directories.

Compatibility with Older Systems

If an ACL has been set on any file on a given file system that files system has the ext_attr attribute. This attribute can be seen using the following command:
tune2fs -l <filesystem-device>
A file system that has acquired the ext_attr attribute can be mounted with older kernels, but those kernels do not enforce any ACLs which have been set. Versions of the e2fsck utility included in version 1.22 and higher of the e2fsprogs package (including the versions in Red Hat Enterprise Linux 2.1 and 4) can check a file system with the ext_attr attribute. Older versions refuse to check it.